管理科学与工程系
主页 > 师资力量 > 教师介绍 > 管理科学与工程系
管理科学与工程系
个人信息
姓名: 彭 锐
彭 锐
系别: 管理科学与工程系
职称: 副教授
联系方式: 地址:东凌经管学院大楼1028室
Email:pengrui1988@ustb.edu.cn
简介

2007年7月本科毕业于中国科学技术大学少年班光信息科学与技术专业;2011年10月毕业于新加坡国立大学工业与系统工程系,获得博士学位。2012年1月进入北京科技大学经济管理学院,2014年7月破格晋升为副教授。主要研究领域为系统可靠性分析,优化,以及系统的保护和维修策略。已发表50余篇SCI期刊论文,主持或参与6项国家自然科学基金。彭锐副教授是中国运筹学会可靠性分会理事, 中国运筹法与统筹法学会工业工程分会常务理事,可靠性顶尖期刊Reliability Engineering & System Safety编委, 国际电子电气工程学会资深会员(IEEE senior member)。担任20多个的期刊的匿名评审人, 比如: Reliability Engineering & System Safety, IEEE Transactions on Reliability, IIE Transactions, International Journal of System Sciences, Computers & Industrial Engineering, European Journal of Operational Research, Applied Stochastic models in business and industry.

教育经历

2007年8月-2011年10月      新加坡国立大学工业与系统工程系    工学博士
2003年9月-2007年7月      中国科学技术大学少年班            理学学士

主要科研项目

1. 主持的课题:
[1]《含有温储备元件的复杂多态多阶段系统的可靠性研究》,国家自然科学基金面上项目(71671016),起止时间为2017年1月至2020年12月
[2]《考虑故障覆盖和切换失效的、带有温备份的冗余系统可靠性研究》,国家自然科学基金青年项目(71301009),起止时间为2014年1月至2016年12月
[3]《不完全故障覆盖下带有温备份的冗余系统可靠性研究》,为博士后基金面上项目(2013M530531),起止时间为2013年6月至2014年12月。
[4]《复杂工程系统维修与备件管理研究》,中央高校基本科研业务费(FRF-MP-13-009A),起止时间为2013年1月至2013年12月。
[5]《考虑故障覆盖的温备份系统可靠性模型》,中央高校基本科研业务费(FRF-TP-13-026A),起止时间为2013年1月至2013年12月。

2. 参与的课题:
[1] 《预测和基于状态预测的复杂工程系统健康管理》,国家自然科学基金重点项目(70972120),起止时间为2013年1月至2017年12月,由王文彬教授主持。
[2] 《基于状态预测的复杂工程系统维修管理》,教育部博士学科点专项科研基金,起止时间为2013年1月至2015年12月,由王文彬教授主持。
[3] 《先进生产系统的组织仿真建模理论及组织策略优化》,中央高校基本科研业务费,起止时间为2013年1月至2013年12月,由张晓冬教授主持。
[4] 《人群健康管理和寿命疾病风险评估》,国家自然科学基金重大国际合作项目(71420107023),起止时间为2015年1月至2019年12月,由王文彬教授主持。

代表性著作

专著:

Rui PENG, Yanfu LI, Yu LIU, 2018. Software fault detection and correction: modeling and application. Springer.

 

2013年以来的英文SCI论文:(Web of Science引用合计418次, 最新影响因子合计约130)

第一作者论文:(Web of Science引用合计157次, 最新影响因子合计约40)

1.Peng, R., Mo, H. D., Xie, M., Levitin, G., 2013. Optimal structure of multi-state systems with multi-fault coverage. Reliability Engineering and System Safety 119,18-25. (中科院二区, 最新影响因子4.139, Web of Science引用25次)

2.Peng, R., Li, Y.F., Zhang, J.G., Li, X., 2015. A risk-reduction approach for optimal software release time determination with the delay incurred cost. International Journal of Systems Science 46 (9), 1628-1637. (中科院二区, 最新影响因子2.185, Web of Science引用5次)

3.Peng, R., Zhai, Q.Q., Xing, L.D., Yang, J., 2014. Reliability of demand-based phased-mission systems subject to fault level coverage. Reliability Engineering and System Safety 121,18-25.( 中科院二区, 最新影响因子4.139, Web of Science引用42次)

4.Peng, R., Guo, Li, Levitin, G., MO, H.D., Wang, W.B., 2014. Maintenance versus individual and overarching protections for parallel systems. Quality Technology and Quantitative Management 11 (3), 353-362. (中科院四区, 最新影响因子0.662, Web of Science引用5次)

5.Peng, R., Li, Y.F., Zhang, W.J., Hu, Q.P. Testing effort dependent software reliability model for imperfect debugging process considering both detection and correction. Reliability Engineering and System Safety, v 126, p 37-43, June 2014. (中科院二区, 最新影响因子4.139, Web of Science引用36次)

6.Peng, R., Zhai, Q., Levitin, G., 2016. Defending a single object against an attacker trying to detect a subset of false targets. Reliability Engineering & System Safety 149, 137-147. (中科院二区, 最新影响因子4.139, Web of Science引用10次)

7.Peng R., Zhai Q., Xing L., Yang J., 2016. Reliability analysis and optimal structure of series-parallel phased-mission systems subject to fault level coverage. IIE Transactions. 48 (8), 736-746. (ABS三星, 最新影响因子1.759, Web of Science引用21次)

8.Peng, R., Liu H., Xie M., 2016. A Study of Reliability of Multi-state Systems with Two Performance Sharing Groups. Quality & Reliability Engineering International. ,32(7):2623-2632. (中科院三区, 最新影响因子1.604, Web of Science引用5次)

9.Peng, R., Xiao, H., Liu, H., 2017. Reliability of multi-state Systems with a Performance Sharing Group of Limited Size. Reliability Engineering & System Safety 166, 164-170. (中科院二区, 最新影响因子4.139, Web of Science引用7次)

10.Peng, R., Zhai, Q., 2017. Modeling of Software Fault Detection and Correction Processes with Fault Dependency. Eksploatacja i Niezawodnosc– Maintenance and Reliability 19 (3), 467-475. (中科院三区, 最新影响因子1.383, Web of Science引用1次)

11.Peng, R., Liu, B., Zhai, Q.*, Wang, W., 2018. Optimal maintenance strategy for systems with two failure modes. Reliability Engineering and System Safety, Forthcoming.  (中科院二区, 最新影响因子1.383)

12.Peng, R., 2018. Reliability of interdependent networks with cascading failures. Eksploatacja i Niezawodnosc– Maintenance and Reliability 20 (2): 273–277. (中科院三区, 最新影响因子1.383)

13.Peng, R., 2018. Optimal component allocation in a multi-state system with hierarchical performance sharing groups. Journal of the Operational Research Society. Forthcoming. (ABS三星, 最新影响因子1.396)

14.Peng, R., Xiao, H., 2018. Reliability of Linear Consecutive-k-out-of-n Systems with Two Change Points. IEEE Transactions on Reliability 67 (3), 1019-1029. (中科院二区, 最新影响因子2.729)

15.Peng, R., 2018. Joint routing and aborting optimization of cooperative unmanned aerial vehicles. Reliability Engineering and System Safety. 177,131-137.  (中科院二区, 最新影响因子4.139) 

16.Peng, R., Wu, D., Zhai, Q. 2018. Defense resource allocation against sequential unintentional and intentional impacts. IEEE Transactions on Reliability. Forthcoming. (中科院二区, 最新影响因子2.729)

通讯作者论文:(Web of Science引用合计80次, 最新影响因子合计约30)

17.Zhai, Q., Peng, R.*, Xing, L., Yang, J., 2013. “ Binary decision diagram-based Reliability Evaluation of k-out-of-(n plus k) Warm Standby Systems Subject to Fault-Level Coverage,” Journal of Risk and Reliability ,227(5):540-548. (中科院四区, 最新影响因子1.373, Web of Science引用21次)

18.Li, Y.F., Peng, R.*, 2014. Availability modeling and optimization of dynamic multi-state series-parallel systems with random reconfiguration. Reliability Engineering and System Safety 127, 47-57. (中科院二区, 最新影响因子4.139, Web of Science引用17次) 

19.Liu, X, Wang, W., Peng, R*, 2015.An integrated production, inventory and preventive maintenance model for a multi-product production system. Reliability Engineering and System Safety 137 (may):76-86. (中科院二区, 最新影响因子4.139, Web of Science引用27次)

20.Li, Y., Peng, R.*, 2015. Service Reliability Modeling of Distributed Computing Systems with Virus Epidemics. Applied Mathematical Modelling 39, 5681-5692. (中科院一区, 最新影响因子2.617, Web of Science引用6次)

21.Xiao, H., Peng R.*, Wang, W.B., Zhao, F., 2015. Optimal Element Loading for Linear Sliding Window Systems. Journal of Risk and Reliability 230 (1), 75-84.(中科院四区, 最新影响因子1.373)

22.Li, P., Wang, W., Peng, R.*, 2016. Age-based Replacement Policy With Consideration of Production Wait Time. IEEE Transactions on Reliability 65 (1), 235-247.( 中科院二区, 最新影响因子2.729, Web of Science引用6次)

23.Wang, H., Wang, W., Peng, R.*, 2017.A two-phase inspection model for a single component system with three-stage degradation. Reliability Engineering & System Safety 158: 31-40.( 中科院二区, 最新影响因子4.139, Web of Science引用2次)

24.Wu, D., Xiao, H., Peng, R*, 2017. Object defense with preventive strike and false targets. Reliability Engineering and System Safety 169, 76-80.(中科院二区, 最新影响因子4.139, Web of Science引用1次)

25.Zhai, Q., Xing, L., Peng, R*., Yang, J., 2018. Aggregated Combinatorial Reliability Model for Non-Repairable Parallel Phased-Mission Systems. Reliability Engineering and System Safety 176, 242-250. (中科院二区, 最新影响因子4.139)

其他作者论文(Web of Science引用合计181次, 最新影响因子合计约60)

26.Wang, W., Zhao F, Peng R. A Preventive maintenance model with a two-level inspection policy based on a three-stage failure process. Reliability Engineering and System Safety, 121, 207-220, 2014. (中科院二区, 最新影响因子4.139, Web of Science引用27次)

27.Zhai, Q.Q., Peng, R., Xing, L.D., Yang, J., 2015. Reliability of demand-based warm standby systems subject to fault level coverage. Applied Stochastic Models in Business and Industry 31 (3), 380-393. (中科院三区, 最新影响因子1.062, Web of Science引用12次)

28.Zhai, Q.Q., Yang, J., Peng, R., Zhao, Y, 2015. A study of optimal component order in a general 1-out-of-n warm standby system. IEEE Transactions on Reliability 64 (1): 349-358. (中科院二区, 最新影响因子2.729, Web of Science引用5次)

29.Xiao, H., Peng, R., 2014. Optimal allocation and maintenance of multi-state elements in series-parallel systems with common bus performance sharing. Computers and Industrial Engineering 72 (1), 143-151. (中科院二区, 最新影响因子3.195, Web of Science引用25次)

30.Chiming Guo, Wenbin Wang, Bo Guo,Rui Peng,2013. Maintenance Optimization for Systems With Dependent Competing Risks Using a Copula Function. Eksploatacja i Niezawodnosc– Maintenance and Reliability , 15(1),9-17. (中科院三区, 最新影响因子1.383, Web of Science引用6次)

31.Ola, T., Xing, L.D., Peng, R., Xie, M., 2014. Reliability of Warm-Standby Systems subject to Imperfect Fault Coverage. Journal of Risk and Reliability, 228(6) 606–620. (中科院四区, 最新影响因子1.373, Web of Science引用4次)

32.Zhao F, Wang W, Peng R., 2015. Delay-time-based preventive maintenance modeling for a production plant: a case study in a steel mill". Journal of the Operational Research Society 66, (12), 2015-2024.(ABS三星, 最新影响因子1.396, Web of Science引用5次)

33.Liu, X., Wang, W., Peng, R.,2015. An Integrated Production and Delay-time based Preventive Maintenance Planning Model for a Multi-product Production System. Eksploatacja i Niezawodnosc– Maintenance and Reliability, 17(2):215-221.(中科院三区, 最新影响因子1.383, Web of Science引用6次)

34.Zhai, Q.Q., Xing, L. D., Peng, R., Yang, J., 2015. Multi-valued Decision Diagram-Based Reliability Analysis of k-out-of-n Cold Standby Systems Subject to Scheduled Backups. IEEE Transactions on Reliability, 64(4):1310 - 1324. (中科院二区, 最新影响因子2.729, Web of Science引用13次)

35.Liu, X.J., Wang, W.B., Peng, R., 2015. A Delay-Time-Based Inspection Model for Parallel Systems. Journal of Risk and Reliability 229 (6), 556-567.(中科院四区, 最新影响因子1.373, Web of Science引用3次)

36.Xiao, H., Peng, R., Levitin, G., 2015. Optimal replacement and allocation of multi-state elements in k-within-m-from-r/n sliding window systems. Applied Stochastic Models in Business and Industry 32 (2), 184-198.(中科院三区, 最新影响因子1.062, Web of Science引用2次)

37.Xiao, H., Shi, D.M., Ding, Y., Peng R., 2015. Optimal Loading and Protection of Multi-state Systems Considering Performance Sharing Mechanism. Reliability Engineering & System Safety 149, 88-95.(中科院二区, 最新影响因子4.139, Web of Science引用8次)

38.Yu Huan, Yang Jun, Peng, Rui, Zhao Yu., 2016. Linear multi-state consecutively-connected systems constrained by m consecutive and n total gaps. Reliability Engineering & Systems Safety 150, 35-43.(中科院二区, 最新影响因子4.139, Web of Science引用12次)

39.Zhai Qingqing, Ye Zhisheng, Peng, Rui, Wang Wenbin, 2016. Defense and Attack of Performance-Sharing Common Bus Systems. European Journal of Operational Research. 256(3):962–975.(中科院二区, ABS4星, 最新影响因子3.428, Web of Science引用8次)

40.Yang, L., Ma, X., Peng, R., Zhai, Q., Zhao, Y., 2017.A preventive maintenance policy based on dependent two-stage deterioration and external shocks. Reliability Engineering & Engineering Safety 160,201-211.(中科院二区, 最新影响因子4.139, Web of Science引用14次)

41.Hu, L., Su, Peng, Peng, R., Zhang, Z., 2017. Fuzzy Availability Assessment for Discrete Time Multi-State System under Minor Failures and Repairs by Using Fuzzy-transform. Eksploatacja i Niezawodnosc– Maintenance and Reliability 2,179-190.(中科院三区, 最新影响因子1.383)

42.Wang, C., Xing, L., Peng, R., Pan, Z., 2017.Competing failure analysis in phased-mission systems with multiple functional dependence groups. Reliability Engineering & System Safety 164, 24-33.(中科院二区, 最新影响因子4.139, Web of Science引用7次)

43.Jia, H., Ding, Y., Peng, R. 2017. Reliability Evaluation for Demand-based Warm Standby Systems Considering Degradation Process. IEEE Transactions on Reliability 66 (3), 795-805.(中科院二区, 最新影响因子2.729, Web of Science引用3次)

44.Liu, X., Wang, W., Peng, R., 2017. An Integrated Preventive Maintenance and Production Planning Model with Sequence-dependent Setup Costs and Times. Quality and Reliability Engineering International 33 (8), 2451-2461.(中科院三区, 最新影响因子1.604, Web of Science引用3次)

45.Yang, L., Zhao, Y., Peng, R., Ma, X., 2018. Opportunistic maintenance of production systems subject to random wait time and multiple control limits. Journal of Manufacturing Systems 47, 12-34. (中科院二区, 最新影响因子3.699, Web of Science引用1次)

46.Yang, L., Zhao, Y., Peng, R., Ma, X., 2018. Hybrid preventive maintenance of competing failures under random environment. Reliability Engineering and System Safety 174, 130-140.(中科院二区, 最新影响因子4.139, Web of Science引用7次)

47.Wang, G., Peng, R., Xing, L., 2018. Reliability evaluation of unrepairable k-out-of-n: G systems with phased-mission requirements based on record values. Reliability Engineering and System Safety 178, 191-197. (中科院二区, 最新影响因子4.139)

48.Jia, H., Peng, R., Ding, Y., Song, Y., 2018. Reliability of demand-based warm standby system with common bus performance sharing. Journal of Risk and Reliability. Forthcoming. (中科院四区, 最新影响因子1.373)

 

研究方向

系统可靠性分析,优化,以及系统的保护和维修策略。

主讲课程

本科生:决策支持系统
研究生:商务统计(留学生)、研究设计与论文写作(留学生),经济学导论(留学生),经济分析(留学生)